{"title":"Zetor Tractor Decals","description":"\u003ch2 data-start=\"142\" data-end=\"212\"\u003e\u003cstrong data-start=\"145\" data-end=\"212\"\u003eZetor Tractor Decals – Restore the Factory Look of Your Machine\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"214\" data-end=\"510\"\u003eBring your Zetor tractor back to life with our premium replacement decal sets, designed to match original factory graphics with precision and durability. At Decal-Works, we offer a wide range of Zetor tractor decals covering classic, vintage and modern Zetor models used in agriculture worldwide.\u003c\/p\u003e\n\u003chr data-start=\"512\" data-end=\"515\"\u003e\n\u003ch2 data-start=\"517\" data-end=\"546\"\u003e\u003cstrong data-start=\"520\" data-end=\"546\"\u003eOEM-Style Zetor Decals\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"548\" data-end=\"733\"\u003eOur Zetor decal sets are designed to closely replicate the original factory appearance. They give your tractor a clean, professional OEM look while preserving the iconic Zetor branding.\u003c\/p\u003e\n\u003chr data-start=\"735\" data-end=\"738\"\u003e\n\u003ch2 data-start=\"740\" data-end=\"773\"\u003e\u003cstrong data-start=\"743\" data-end=\"773\"\u003eHeavy-Duty Outdoor Quality\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"775\" data-end=\"998\"\u003eAll Zetor tractor decals are produced using high-grade outdoor vinyl, UV-resistant inks and strong adhesive. They are built to withstand sunlight, rain, dirt, washing and demanding farm conditions without fading or peeling.\u003c\/p\u003e\n\u003chr data-start=\"1000\" data-end=\"1003\"\u003e\n\u003ch2 data-start=\"1005\" data-end=\"1041\"\u003e\u003cstrong data-start=\"1008\" data-end=\"1041\"\u003ePrecision-Cut for Perfect Fit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1043\" data-end=\"1188\"\u003eEvery decal set is precision-cut for a perfect fit on your Zetor tractor. Installation is simple and the finished result looks factory-installed.\u003c\/p\u003e\n\u003chr data-start=\"1190\" data-end=\"1193\"\u003e\n\u003ch2 data-start=\"1195\" data-end=\"1225\"\u003e\u003cstrong data-start=\"1198\" data-end=\"1225\"\u003eFast Worldwide Shipping\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1227\" data-end=\"1429\"\u003eAll Zetor decals are shipped worldwide from our warehouse with \u003cstrong data-start=\"1290\" data-end=\"1319\"\u003efree delivery in 3–7 days\u003c\/strong\u003e. Each order is carefully packed to arrive in perfect condition, whether you order one set or bulk quantities.\u003c\/p\u003e\n\u003chr data-start=\"1431\" data-end=\"1434\"\u003e\n\u003ch2 data-start=\"1436\" data-end=\"1465\"\u003e\u003cstrong data-start=\"1439\" data-end=\"1465\"\u003eWhy Choose Decal-Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1467\" data-end=\"1622\"\u003e• OEM-style Zetor graphics\u003cbr data-start=\"1493\" data-end=\"1496\"\u003e• High-grade outdoor vinyl\u003cbr data-start=\"1522\" data-end=\"1525\"\u003e• Easy application\u003cbr data-start=\"1543\" data-end=\"1546\"\u003e• Free worldwide shipping\u003cbr data-start=\"1571\" data-end=\"1574\"\u003e• Trusted by farmers and tractor professionals\u003c\/p\u003e","products":[{"product_id":"zetor-proxima-8441-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor Proxima 8441 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213892903241,"sku":"zetor-proxima-8441-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":74.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140520994_ax05.jpg?v=1761643441"},{"product_id":"zetor-3511-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 3511 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213907616073,"sku":"zetor-3511-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140573082_tj9l.jpg?v=1761643529"},{"product_id":"zetor-4712-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4712 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908304201,"sku":"zetor-4712-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188239609_26zu.jpg?v=1761643545"},{"product_id":"zetor-6211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6211 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908533577,"sku":"zetor-6211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188259567_gx73.jpg?v=1761643549"},{"product_id":"zetor-6945-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6945 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213961716041,"sku":"zetor-6945-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188265589_e0fi.jpg?v=1761644139"},{"product_id":"zetor-7045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213963157833,"sku":"zetor-7045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140606352_gsmi.jpg?v=1761644161"},{"product_id":"zetor-7211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7211 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965189449,"sku":"zetor-7211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188269675_3r74.jpg?v=1761644198"},{"product_id":"zetor-7045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","title":"Zetor 7045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965287753,"sku":"zetor-7045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188268863_2eiu.jpg?v=1761644199"},{"product_id":"zetor-7745-turbo-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7745 Turbo Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965353289,"sku":"zetor-7745-turbo-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140616224_bik5.jpg?v=1761644202"},{"product_id":"zetor-7745-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7745 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965386057,"sku":"zetor-7745-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140614656_cgpb.jpg?v=1761644202"},{"product_id":"zetor-7711-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7711 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965484361,"sku":"zetor-7711-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140613370_g0as.jpg?v=1761644204"},{"product_id":"zetor-7340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7340 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965582665,"sku":"zetor-7340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140612268_rhj7.jpg?v=1761644204"},{"product_id":"zetor-7320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7320 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965615433,"sku":"zetor-7320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188272271_sucm.jpg?v=1761644206"},{"product_id":"zetor-7245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7245 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965648201,"sku":"zetor-7245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140609568_mqig.jpg?v=1761644209"},{"product_id":"zetor-6911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6911 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965713737,"sku":"zetor-6911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188263911_6dzw.jpg?v=1761644209"},{"product_id":"zetor-6245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6245 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965746505,"sku":"zetor-6245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188260825_t16h.jpg?v=1761644212"},{"product_id":"zetor-6320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6320 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965779273,"sku":"zetor-6320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140600996_njbs.jpg?v=1761644212"},{"product_id":"zetor-5611-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5611 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965910345,"sku":"zetor-5611-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140590104_riwy.jpg?v=1761644214"},{"product_id":"zetor-6045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965943113,"sku":"zetor-6045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188258891_fdvb.jpg?v=1761644215"},{"product_id":"zetor-6045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","title":"Zetor 6045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213965975881,"sku":"zetor-6045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140597220_8nbg.jpg?v=1761644217"},{"product_id":"zetor-5711c-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5711C Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966008649,"sku":"zetor-5711c-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140591366_f8n6.jpg?v=1761644217"},{"product_id":"zetor-5545-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5545 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966041417,"sku":"zetor-5545-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140588964_i5nz.jpg?v=1761644220"},{"product_id":"zetor-5245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5245 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966106953,"sku":"zetor-5245-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188248857_pxba.jpg?v=1761644221"},{"product_id":"zetor-5011-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5011 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966172489,"sku":"zetor-5011-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140584602_n419.jpg?v=1761644222"},{"product_id":"zetor-4320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4320 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966205257,"sku":"zetor-4320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188235301_gyq4.jpg?v=1761644222"},{"product_id":"zetor-3320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 3320 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966303561,"sku":"zetor-3320-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140570662_813o.jpg?v=1761644225"},{"product_id":"zetor-5243-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5243 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966369097,"sku":"zetor-5243-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188247553_5j6x.jpg?v=1761644226"},{"product_id":"zetor-5211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5211 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966401865,"sku":"zetor-5211-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140585762_nhwn.jpg?v=1761644228"},{"product_id":"zetor-4340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4340 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966434633,"sku":"zetor-4340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188236721_lozk.jpg?v=1761644228"},{"product_id":"zetor-3340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 3340 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966500169,"sku":"zetor-3340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140571894_6ae6.jpg?v=1761644230"},{"product_id":"zetor-7320-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7320 (2000) Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966565705,"sku":"zetor-7320-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140507740_58bj.jpg?v=1761644231"},{"product_id":"zetor-6340-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6340 (2000) Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966631241,"sku":"zetor-6340-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188166645_8l0x.jpg?v=1761644232"},{"product_id":"zetor-9520-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 9520 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213966729545,"sku":"zetor-9520-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188089825_hyki.jpg?v=1761644235"},{"product_id":"zetor-10641-forterra-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 10641 Forterra Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214017225033,"sku":"zetor-10641-forterra-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140464282_ju4p.jpg?v=1761644599"},{"product_id":"zetor-6911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","title":"Zetor 6911 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214028005705,"sku":"zetor-6911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140603860_1vf1.jpg?v=1761644735"},{"product_id":"zetor-6320-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6320 (2000) Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214032265545,"sku":"zetor-6320-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140505052_i1ye.jpg?v=1761644808"},{"product_id":"zetor-7340-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7340 (2000) Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214033150281,"sku":"zetor-7340-2000-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140508586_fo70.jpg?v=1761644818"},{"product_id":"zetor-5718-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5718 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214041833801,"sku":"zetor-5718-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140592448_mb6p.jpg?v=1761644829"},{"product_id":"zetor-11441-forterra-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 11441 Forterra Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214042030409,"sku":"zetor-11441-forterra-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140497116_8wfr.jpg?v=1761644833"},{"product_id":"zetor-5911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 5911 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214063657289,"sku":"zetor-5911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188254593_ni6o.jpg?v=1761645018"},{"product_id":"zetor-4911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4911 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214076830025,"sku":"zetor-4911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188242635_16my.jpg?v=1761645114"},{"product_id":"zetor-6340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 6340 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214083318089,"sku":"zetor-6340-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188263071_pqg7.jpg?v=1761645236"},{"product_id":"zetor-3511-s-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 3511 S Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214084366665,"sku":"zetor-3511-s-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140574316_m1uy.jpg?v=1761645261"},{"product_id":"zetor-7540-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 7540 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214084792649,"sku":"zetor-7540-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140422572_2mex.jpg?v=1761645271"},{"product_id":"zetor-4718-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4718 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214100783433,"sku":"zetor-4718-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188241169_5xpi.jpg?v=1761645437"},{"product_id":"zetor-4511-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 4511 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214102421833,"sku":"zetor-4511-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140577592_6rh8.jpg?v=1761645462"},{"product_id":"zetor-9540-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set","title":"Zetor 9540 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Zetor Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214109401417,"sku":"zetor-9540-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140431100_gvg7.jpg?v=1761645581"},{"product_id":"zetor-6045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-2","title":"Zetor 6045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003ch2 data-pm-slice=\"1 1 []\"\u003e\n\u003cspan\u003e\u003cstrong\u003eAftermarket replacement decals set to fit Zetor Tractor.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch3 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003e1. Premium Aftermarket Decals for Boats and Vehicles\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eGive your boat or vehicle a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with our \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003epremium aftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Designed for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003edurability, UV resistance, and easy application\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, our decals offer a long-lasting and professional finish. Shop our selection of \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eaftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e today and upgrade your ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e2. High-Quality Custom Decals for All Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eDecal Works LTD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, we provide \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ecustom decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e for boats, motorcycles, trucks, and more. Our high-quality vinyl decals are designed to withstand extreme weather conditions while maintaining their \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ebold colors and sleek finish\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Browse our wide selection of \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ereplacement decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to find the perfect fit for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e3. Weather-Resistant Vinyl Decals for Maximum Durability\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your vehicle with \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-resistant, fade-proof, and weather-resistant decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e from \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. Our decals are made from \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-performance vinyl\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003elong-lasting adhesion\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eprofessional factory look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Perfect for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003emarine, automotive, and industrial applications\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eTools \u0026amp; Materials Needed\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eBefore starting, gather the following materials:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003eAftermarket decal\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSoapy water solution (mix water with a few drops of dish soap)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSqueegee or plastic card\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMasking tape or painter’s tape\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMicrofiber cloth\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring tape or ruler\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRazor blade or utility knife (optional for trimming)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eStep-by-Step Guide to Applying Aftermarket Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 1: Mark the Position of the Decal\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing masking tape or a non-permanent marker, outline the area where you want to place the decal. This ensures proper alignment and prevents crooked application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 2: Remove the Decal and Prepare a Clean Surface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully peel off the decal and place it on a rigid, flat surface. Make sure the application area on your boat or vehicle is \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eclean, dry, and free from dust, grease, or wax.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e Use a microfiber cloth and a mild cleaning solution to wipe the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 3: Peel Back the Backing Paper \u0026amp; Apply Soapy Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eSlowly peel off the backing paper from the decal. As you do this, \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003espray a light mist of the soapy water solution onto the adhesive side\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e of the decal. This will allow you to adjust its position more easily during application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 4: Position the Decal on the Marked Area\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully place the wet decal onto the marked position. The soapy water prevents the decal from sticking immediately, giving you time to make minor adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 5: Smooth Out the Decal \u0026amp; Remove Excess Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing a squeegee or plastic card, gently press the decal from the center outward. This will remove any trapped air bubbles and excess water. Be sure to use \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eeven pressure\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to avoid wrinkles.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 6: Let the Decal Dry \u0026amp; Remove the Transfer Tape (If Applicable)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAllow the decal to dry for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eat least 24 hours\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e before exposing it to water or harsh conditions. If your decal comes with a transfer tape, carefully peel it off once the decal is fully adhered.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eCommon Mistakes to Avoid\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e❌ Applying decals on a dirty or greasy surface – this can cause peeling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Not using soapy water – dry application may lead to air bubbles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Rushing the process – always let the decal dry completely.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Using excessive force when squeegeeing – this may stretch or damage the decal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eMaintenance Tips for Long-Lasting Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eHand wash\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e your boat or vehicle instead of using high-pressure washers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eAvoid harsh chemicals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e that may fade or damage the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCheck for peeling edges\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and press them down if needed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eStore in a shaded area\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e when possible to prevent excessive UV exposure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWhy Choose Decal Works for Aftermarket Decals?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works LTD\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e provides \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-quality, weather-resistant vinyl decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e designed to enhance the look of your equipment, boat, or vehicle. Their decals offer a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh appearance\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring a professional and seamless fit. With a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efade-resistant\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-proof\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e finish, decals from Decal Works maintain their vibrant colors for years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis is not an OEM decal\u003c\/span\u003e - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/span\u003e\u003c\/p\u003e","brand":"4-11 Decals","offers":[{"title":"Default Title","offer_id":53214440227145,"sku":null,"price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188258891_fdvb_ffe3cedc-4e8b-4822-9d0c-bd67c8ff67ff.jpg?v=1761651375"},{"product_id":"zetor-6911-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-2","title":"Zetor 6911 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003ch2 data-pm-slice=\"1 1 []\"\u003e\n\u003cspan\u003e\u003cstrong\u003eAftermarket replacement decals set to fit Zetor Tractor.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch3 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003e1. Premium Aftermarket Decals for Boats and Vehicles\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eGive your boat or vehicle a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with our \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003epremium aftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Designed for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003edurability, UV resistance, and easy application\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, our decals offer a long-lasting and professional finish. Shop our selection of \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eaftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e today and upgrade your ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e2. High-Quality Custom Decals for All Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eDecal Works LTD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, we provide \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ecustom decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e for boats, motorcycles, trucks, and more. Our high-quality vinyl decals are designed to withstand extreme weather conditions while maintaining their \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ebold colors and sleek finish\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Browse our wide selection of \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ereplacement decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to find the perfect fit for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e3. Weather-Resistant Vinyl Decals for Maximum Durability\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your vehicle with \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-resistant, fade-proof, and weather-resistant decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e from \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. Our decals are made from \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-performance vinyl\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003elong-lasting adhesion\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eprofessional factory look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Perfect for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003emarine, automotive, and industrial applications\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eTools \u0026amp; Materials Needed\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eBefore starting, gather the following materials:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003eAftermarket decal\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSoapy water solution (mix water with a few drops of dish soap)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSqueegee or plastic card\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMasking tape or painter’s tape\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMicrofiber cloth\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring tape or ruler\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRazor blade or utility knife (optional for trimming)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eStep-by-Step Guide to Applying Aftermarket Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 1: Mark the Position of the Decal\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing masking tape or a non-permanent marker, outline the area where you want to place the decal. This ensures proper alignment and prevents crooked application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 2: Remove the Decal and Prepare a Clean Surface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully peel off the decal and place it on a rigid, flat surface. Make sure the application area on your boat or vehicle is \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eclean, dry, and free from dust, grease, or wax.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e Use a microfiber cloth and a mild cleaning solution to wipe the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 3: Peel Back the Backing Paper \u0026amp; Apply Soapy Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eSlowly peel off the backing paper from the decal. As you do this, \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003espray a light mist of the soapy water solution onto the adhesive side\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e of the decal. This will allow you to adjust its position more easily during application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 4: Position the Decal on the Marked Area\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully place the wet decal onto the marked position. The soapy water prevents the decal from sticking immediately, giving you time to make minor adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 5: Smooth Out the Decal \u0026amp; Remove Excess Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing a squeegee or plastic card, gently press the decal from the center outward. This will remove any trapped air bubbles and excess water. Be sure to use \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eeven pressure\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to avoid wrinkles.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 6: Let the Decal Dry \u0026amp; Remove the Transfer Tape (If Applicable)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAllow the decal to dry for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eat least 24 hours\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e before exposing it to water or harsh conditions. If your decal comes with a transfer tape, carefully peel it off once the decal is fully adhered.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eCommon Mistakes to Avoid\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e❌ Applying decals on a dirty or greasy surface – this can cause peeling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Not using soapy water – dry application may lead to air bubbles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Rushing the process – always let the decal dry completely.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Using excessive force when squeegeeing – this may stretch or damage the decal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eMaintenance Tips for Long-Lasting Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eHand wash\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e your boat or vehicle instead of using high-pressure washers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eAvoid harsh chemicals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e that may fade or damage the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCheck for peeling edges\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and press them down if needed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eStore in a shaded area\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e when possible to prevent excessive UV exposure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWhy Choose Decal Works for Aftermarket Decals?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works LTD\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e provides \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-quality, weather-resistant vinyl decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e designed to enhance the look of your equipment, boat, or vehicle. Their decals offer a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh appearance\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring a professional and seamless fit. With a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efade-resistant\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-proof\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e finish, decals from Decal Works maintain their vibrant colors for years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis is not an OEM decal\u003c\/span\u003e - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/span\u003e\u003c\/p\u003e","brand":"4-11 Decals","offers":[{"title":"Default Title","offer_id":53214441537865,"sku":null,"price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4140603860_1vf1_fd9eee4e-1079-47ba-b7f8-8676f82bbd87.jpg?v=1761651400"},{"product_id":"zetor-7045-aftermarket-tractor-decal-aufkleber-adesivo-sticker-set-2","title":"Zetor 7045 Aftermarket Tractor Decal \/ Aufkleber \/ Adesivo \/ Sticker Set","description":"\u003ch2 data-pm-slice=\"1 1 []\"\u003e\n\u003cspan\u003e\u003cstrong\u003eAftermarket replacement decals set to fit Zetor Tractor.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch3 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003e\u003cstrong\u003e1. Premium Aftermarket Decals for Boats and Vehicles\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eGive your boat or vehicle a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e with our \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003epremium aftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Designed for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003edurability, UV resistance, and easy application\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, our decals offer a long-lasting and professional finish. Shop our selection of \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eaftermarket decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e today and upgrade your ride!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e2. High-Quality Custom Decals for All Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAt \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003e\u003cstrong\u003eDecal Works LTD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e, we provide \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ecustom decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e for boats, motorcycles, trucks, and more. Our high-quality vinyl decals are designed to withstand extreme weather conditions while maintaining their \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ebold colors and sleek finish\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Browse our wide selection of \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ereplacement decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to find the perfect fit for your project.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003e3. Weather-Resistant Vinyl Decals for Maximum Durability\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your vehicle with \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-resistant, fade-proof, and weather-resistant decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e from \u003c\/span\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e. Our decals are made from \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-performance vinyl\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003elong-lasting adhesion\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eprofessional factory look\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e. Perfect for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003emarine, automotive, and industrial applications\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eTools \u0026amp; Materials Needed\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eBefore starting, gather the following materials:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/collections\/yamaha\/yamaha-decals\" disabled\u003e\u003cspan\u003eAftermarket decal\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSoapy water solution (mix water with a few drops of dish soap)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eSqueegee or plastic card\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMasking tape or painter’s tape\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMicrofiber cloth\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eMeasuring tape or ruler\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eRazor blade or utility knife (optional for trimming)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eStep-by-Step Guide to Applying Aftermarket Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 1: Mark the Position of the Decal\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing masking tape or a non-permanent marker, outline the area where you want to place the decal. This ensures proper alignment and prevents crooked application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 2: Remove the Decal and Prepare a Clean Surface\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully peel off the decal and place it on a rigid, flat surface. Make sure the application area on your boat or vehicle is \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eclean, dry, and free from dust, grease, or wax.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e Use a microfiber cloth and a mild cleaning solution to wipe the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 3: Peel Back the Backing Paper \u0026amp; Apply Soapy Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eSlowly peel off the backing paper from the decal. As you do this, \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003espray a light mist of the soapy water solution onto the adhesive side\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e of the decal. This will allow you to adjust its position more easily during application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 4: Position the Decal on the Marked Area\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully place the wet decal onto the marked position. The soapy water prevents the decal from sticking immediately, giving you time to make minor adjustments.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 5: Smooth Out the Decal \u0026amp; Remove Excess Water\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eUsing a squeegee or plastic card, gently press the decal from the center outward. This will remove any trapped air bubbles and excess water. Be sure to use \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eeven pressure\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e to avoid wrinkles.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eStep 6: Let the Decal Dry \u0026amp; Remove the Transfer Tape (If Applicable)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAllow the decal to dry for \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eat least 24 hours\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e before exposing it to water or harsh conditions. If your decal comes with a transfer tape, carefully peel it off once the decal is fully adhered.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eCommon Mistakes to Avoid\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e❌ Applying decals on a dirty or greasy surface – this can cause peeling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Not using soapy water – dry application may lead to air bubbles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Rushing the process – always let the decal dry completely.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e❌ Using excessive force when squeegeeing – this may stretch or damage the decal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eMaintenance Tips for Long-Lasting Decals\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eHand wash\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e your boat or vehicle instead of using high-pressure washers.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eAvoid harsh chemicals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e that may fade or damage the adhesive.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eCheck for peeling edges\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and press them down if needed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eStore in a shaded area\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e when possible to prevent excessive UV exposure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWhy Choose Decal Works for Aftermarket Decals?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/decal-works.com\/\" disabled\u003e\u003cspan\u003eDecal Works LTD\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e provides \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003ehigh-quality, weather-resistant vinyl decals\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e designed to enhance the look of your equipment, boat, or vehicle. Their decals offer a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efactory-fresh appearance\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e, ensuring a professional and seamless fit. With a \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003efade-resistant\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003escratch-proof\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e finish, decals from Decal Works maintain their vibrant colors for years.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eThis is not an OEM decal\u003c\/span\u003e - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/span\u003e\u003c\/p\u003e","brand":"4-11 Decals","offers":[{"title":"Default Title","offer_id":53214441636169,"sku":null,"price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4188268863_2eiu_6779298b-d978-46c6-9ec0-ff61db29695f.jpg?v=1761651410"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/collections\/zetor-tractor-decals-collection.webp?v=1767364700","url":"https:\/\/decal-works.com\/collections\/zetor-decals-stickers.oembed?page=7","provider":"Decal Works Ltd","version":"1.0","type":"link"}