{"title":"Other Tractor \u0026 Machinery Decals","description":"\u003ch2 data-start=\"166\" data-end=\"250\"\u003e\u003cstrong data-start=\"169\" data-end=\"250\"\u003eOther Tractor \u0026amp; Machinery Decals – Restore the Factory Look of Your Equipment\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"252\" data-end=\"613\"\u003eBring your \u003cstrong data-start=\"263\" data-end=\"306\"\u003etractor, loader or agricultural machine\u003c\/strong\u003e back to life with our \u003cstrong data-start=\"329\" data-end=\"363\"\u003epremium replacement decal sets\u003c\/strong\u003e, designed to match the original \u003cstrong data-start=\"396\" data-end=\"416\"\u003efactory graphics\u003c\/strong\u003e with precision and durability.\u003cbr data-start=\"447\" data-end=\"450\"\u003eAt \u003cstrong data-start=\"453\" data-end=\"468\"\u003eDecal-Works\u003c\/strong\u003e, we supply \u003cstrong data-start=\"480\" data-end=\"502\"\u003eaftermarket decals\u003c\/strong\u003e for a wide range of \u003cstrong data-start=\"523\" data-end=\"555\"\u003etractor and machinery brands\u003c\/strong\u003e used in agriculture, construction and industry worldwide.\u003c\/p\u003e\n\u003cp data-start=\"615\" data-end=\"767\"\u003eOur decal kits are built for \u003cstrong data-start=\"644\" data-end=\"694\"\u003efarmers, restorers and equipment professionals\u003c\/strong\u003e who want their \u003cstrong data-start=\"710\" data-end=\"766\"\u003emachines to look factory-new, clean and professional\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"769\" data-end=\"772\"\u003e\n\u003ch2 data-start=\"774\" data-end=\"817\"\u003e\u003cstrong data-start=\"777\" data-end=\"817\"\u003eOEM-Style Tractor \u0026amp; Machinery Decals\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"819\" data-end=\"1068\"\u003eOur \u003cstrong data-start=\"823\" data-end=\"849\"\u003ereplacement decal sets\u003c\/strong\u003e are carefully designed to replicate the \u003cstrong data-start=\"890\" data-end=\"915\"\u003eoriginal OEM graphics\u003c\/strong\u003e, including model markings, logos and safety labels.\u003cbr data-start=\"967\" data-end=\"970\"\u003eThey restore the authentic appearance of your machine and give it a \u003cstrong data-start=\"1038\" data-end=\"1067\"\u003esharp, factory-fresh look\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"1070\" data-end=\"1082\"\u003ePerfect for:\u003c\/p\u003e\n\u003cul data-start=\"1083\" data-end=\"1216\"\u003e\n\u003cli data-start=\"1083\" data-end=\"1108\"\u003e\n\u003cp data-start=\"1085\" data-end=\"1108\"\u003eAgricultural tractors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1109\" data-end=\"1135\"\u003e\n\u003cp data-start=\"1111\" data-end=\"1135\"\u003eConstruction equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1136\" data-end=\"1160\"\u003e\n\u003cp data-start=\"1138\" data-end=\"1160\"\u003eLoaders and handlers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1161\" data-end=\"1185\"\u003e\n\u003cp data-start=\"1163\" data-end=\"1185\"\u003eIndustrial machinery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1186\" data-end=\"1216\"\u003e\n\u003cp data-start=\"1188\" data-end=\"1216\"\u003eVintage \u0026amp; modern equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1218\" data-end=\"1221\"\u003e\n\u003ch2 data-start=\"1223\" data-end=\"1256\"\u003e\u003cstrong data-start=\"1226\" data-end=\"1256\"\u003eHeavy-Duty Outdoor Quality\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1258\" data-end=\"1314\"\u003eAll \u003cstrong data-start=\"1262\" data-end=\"1294\"\u003etractor and machinery decals\u003c\/strong\u003e are produced using:\u003c\/p\u003e\n\u003cul data-start=\"1316\" data-end=\"1407\"\u003e\n\u003cli data-start=\"1316\" data-end=\"1348\"\u003e\n\u003cp data-start=\"1318\" data-end=\"1348\"\u003e\u003cstrong data-start=\"1318\" data-end=\"1346\"\u003eHigh-grade outdoor vinyl\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1349\" data-end=\"1374\"\u003e\n\u003cp data-start=\"1351\" data-end=\"1374\"\u003e\u003cstrong data-start=\"1351\" data-end=\"1372\"\u003eUV-resistant inks\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1375\" data-end=\"1407\"\u003e\n\u003cp data-start=\"1377\" data-end=\"1407\"\u003e\u003cstrong data-start=\"1377\" data-end=\"1407\"\u003eStrong industrial adhesive\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1409\" data-end=\"1442\"\u003eThey are engineered to withstand:\u003c\/p\u003e\n\u003cul data-start=\"1444\" data-end=\"1524\"\u003e\n\u003cli data-start=\"1444\" data-end=\"1456\"\u003e\n\u003cp data-start=\"1446\" data-end=\"1456\"\u003esunlight\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1457\" data-end=\"1477\"\u003e\n\u003cp data-start=\"1459\" data-end=\"1477\"\u003erain and washing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1478\" data-end=\"1495\"\u003e\n\u003cp data-start=\"1480\" data-end=\"1495\"\u003edirt and dust\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1496\" data-end=\"1524\"\u003e\n\u003cp data-start=\"1498\" data-end=\"1524\"\u003eharsh working conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1526\" data-end=\"1571\"\u003eYour decals will \u003cstrong data-start=\"1543\" data-end=\"1570\"\u003enot fade, crack or peel\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"1573\" data-end=\"1576\"\u003e\n\u003ch2 data-start=\"1578\" data-end=\"1614\"\u003e\u003cstrong data-start=\"1581\" data-end=\"1614\"\u003ePrecision-Cut for Perfect Fit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1616\" data-end=\"1797\"\u003eEvery \u003cstrong data-start=\"1622\" data-end=\"1635\"\u003edecal kit\u003c\/strong\u003e is \u003cstrong data-start=\"1639\" data-end=\"1656\"\u003eprecision-cut\u003c\/strong\u003e for a perfect fit on your machine’s panels, hood and bodywork.\u003cbr data-start=\"1719\" data-end=\"1722\"\u003eInstallation is simple and the finished result looks \u003cstrong data-start=\"1775\" data-end=\"1796\"\u003efactory installed\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"1799\" data-end=\"1802\"\u003e\n\u003ch2 data-start=\"1804\" data-end=\"1834\"\u003e\u003cstrong data-start=\"1807\" data-end=\"1834\"\u003eFast Worldwide Shipping\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1836\" data-end=\"2045\"\u003eAll \u003cstrong data-start=\"1840\" data-end=\"1872\"\u003etractor and machinery decals\u003c\/strong\u003e are shipped \u003cstrong data-start=\"1885\" data-end=\"1898\"\u003eworldwide\u003c\/strong\u003e with \u003cstrong data-start=\"1904\" data-end=\"1929\"\u003efast 3–7 day delivery\u003c\/strong\u003e.\u003cbr data-start=\"1930\" data-end=\"1933\"\u003eEach order is carefully packed to arrive in perfect condition, whether you order \u003cstrong data-start=\"2014\" data-end=\"2044\"\u003eone set or bulk quantities\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"2047\" data-end=\"2050\"\u003e\n\u003ch2 data-start=\"2052\" data-end=\"2081\"\u003e\u003cstrong data-start=\"2055\" data-end=\"2081\"\u003eWhy Choose Decal-Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"2083\" data-end=\"2295\"\u003e✔ OEM-style graphics\u003cbr data-start=\"2103\" data-end=\"2106\"\u003e✔ \u003cstrong data-start=\"2108\" data-end=\"2136\"\u003eHigh-grade outdoor vinyl\u003c\/strong\u003e\u003cbr data-start=\"2136\" data-end=\"2139\"\u003e✔ \u003cstrong data-start=\"2141\" data-end=\"2170\"\u003eUV-resistant \u0026amp; waterproof\u003c\/strong\u003e\u003cbr data-start=\"2170\" data-end=\"2173\"\u003e✔ \u003cstrong data-start=\"2175\" data-end=\"2195\"\u003eEasy application\u003c\/strong\u003e\u003cbr data-start=\"2195\" data-end=\"2198\"\u003e✔ \u003cstrong data-start=\"2200\" data-end=\"2227\"\u003eFast worldwide shipping\u003c\/strong\u003e\u003cbr data-start=\"2227\" data-end=\"2230\"\u003e✔ Trusted by \u003cstrong data-start=\"2243\" data-end=\"2295\"\u003efarmers, contractors and equipment professionals\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"jcb-3cx-sitemaster-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-replacement-set","title":"JCB 3CX Sitemaster Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB 3CX Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213896933705,"sku":"jcb-3cx-sitemaster-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-replacement-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4432344894_ogej.jpg?v=1761643482"},{"product_id":"same-buffalo-130-export-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Buffalo 130 Export Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Same Buffalo 130 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213906600265,"sku":"same-buffalo-130-export-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4893529154_qike.jpg?v=1761643516"},{"product_id":"tomo-vinkovic-420-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 420 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 420 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213907124553,"sku":"tomo-vinkovic-420-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177416409_3c25.jpg?v=1761643523"},{"product_id":"lemken-smaragd-9-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Smaragd 9 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908599113,"sku":"lemken-smaragd-9-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6226594964_ql3j.jpg?v=1761643551"},{"product_id":"jcb-3cx-contractor-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set","title":"JCB 3CX Contractor Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Reproduction Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213910270281,"sku":"jcb-3cx-contractor-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set-1","price":160.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6775636777_kf43.jpg?v=1761643590"},{"product_id":"same-corsaro-70-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Corsaro 70 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken Same Corsaro 70 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213912727881,"sku":"same-corsaro-70-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177371955_7ecu.jpg?v=1761643640"},{"product_id":"jcb-3cx-compact-12ft-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set","title":"JCB 3CX Compact 12FT Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Reproduction Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213930422601,"sku":"jcb-3cx-compact-12ft-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set-1","price":160.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6775635069_td8z.jpg?v=1761643743"},{"product_id":"kverneland-eg-85-aftermarket-replacement-tractor-decal-sticker-set","title":"Kverneland EG-85 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Kverneland EG-85 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213944938825,"sku":"kverneland-eg-85-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4126825652_g7to.jpg?v=1761643881"},{"product_id":"lemken-vari-opal-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Vari-Opal Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213948379465,"sku":"lemken-vari-opal-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6226596152_fsyr.jpg?v=1761643933"},{"product_id":"jcb-4cx-14ft-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set","title":"JCB 4CX 14FT Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Reproduction Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213949526345,"sku":"jcb-4cx-14ft-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set-1","price":160.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6727619736_ojl5.jpg?v=1761643959"},{"product_id":"same-leopard-85-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Leopard 85 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Same Leopard 85 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213958439241,"sku":"same-leopard-85-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129714858_h8gr.jpg?v=1761644076"},{"product_id":"lemken-variopal-8-aftermarket-plow-pflug-decal-aufkleber-adesivo-sticker-set","title":"Lemken VariOpal 8 aftermarket plow pflug decal aufkleber adesivo sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken VariOpal 8 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213962568009,"sku":"lemken-variopal-8-aftermarket-plow-pflug-decal-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4127131404_enzs.jpg?v=1761644147"},{"product_id":"same-jaguar-95-export-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Jaguar 95 Export Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken Same Jaguar 95 Export Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213962600777,"sku":"same-jaguar-95-export-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129713178_7dxt.jpg?v=1761644149"},{"product_id":"lemken-opal-110-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Opal 110 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213963977033,"sku":"lemken-opal-110-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274639929_sgng.jpg?v=1761644181"},{"product_id":"lemken-europal-7x-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken EurOpal 7X Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213964075337,"sku":"lemken-europal-7x-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274633525_ak2j.jpg?v=1761644184"},{"product_id":"lamborghini-r-603-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Lamborghini R 603 DT Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lamborghini R 603 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213967352137,"sku":"lamborghini-r-603-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":68.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174538581_7jys.jpg?v=1761644252"},{"product_id":"jcb-4cx-sitemaster-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-replacement-set","title":"JCB 4CX Sitemaster Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB 4CX Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213995499849,"sku":"jcb-4cx-sitemaster-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-replacement-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4432351880_dvtv.jpg?v=1761644259"},{"product_id":"jcb-16-c-1-mini-excavator-minibagger-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set","title":"JCB 16 C-1 Mini Excavator Minibagger Equipment Machinery Aftermarket Decal \/ Aufkleber \/ Adesivo \/ Sticker \/ Reproduction Replacement Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit JCB Equipment Machinery. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214000972105,"sku":"jcb-16-c-1-mini-excavator-minibagger-equipment-machinery-aftermarket-decal-aufkleber-adesivo-sticker-reproduction-replacement-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6775654095_nnmu.jpg?v=1761644272"},{"product_id":"tomo-vinkovic-732-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 732 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 732 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214002872649,"sku":"tomo-vinkovic-732-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177422829_64z7.jpg?v=1761644311"},{"product_id":"tomo-vinkovic-731-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 731 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 731 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214002938185,"sku":"tomo-vinkovic-731-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129760468_9501.jpg?v=1761644312"},{"product_id":"tomo-vinkovic-523-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 523 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 523 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214002970953,"sku":"tomo-vinkovic-523-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177420479_l8u4.jpg?v=1761644311"},{"product_id":"tomo-vinkovic-421-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 421 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 421 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003036489,"sku":"tomo-vinkovic-421-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129755418_azyg.jpg?v=1761644313"},{"product_id":"tomo-vinkovic-730-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 730 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 730 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003331401,"sku":"tomo-vinkovic-730-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177421665_lrxb.jpg?v=1761644315"},{"product_id":"tomo-vinkovic-720-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 720 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 720 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003364169,"sku":"tomo-vinkovic-720-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129759314_7cd9.jpg?v=1761644318"},{"product_id":"tomo-vinkovic-522-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 522 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 522 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003429705,"sku":"tomo-vinkovic-522-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129758066_cm0k.jpg?v=1761644316"},{"product_id":"tomo-vinkovic-518-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 518 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 518 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003495241,"sku":"tomo-vinkovic-518-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177418449_m0kz.jpg?v=1761644318"},{"product_id":"tomo-vinkovic-423-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 423 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 423 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003528009,"sku":"tomo-vinkovic-423-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177417719_fxo0.jpg?v=1761644319"},{"product_id":"tomo-vinkovic-418-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Tomo Vinkovic 418 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Tomo Vinkovic 418 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003560777,"sku":"tomo-vinkovic-418-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177412621_hfvq.jpg?v=1761644321"},{"product_id":"same-panther-90-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Panther 90 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Same Panther 90 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003757385,"sku":"same-panther-90-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4129716524_a9fh.jpg?v=1761644322"},{"product_id":"same-buffalo-120-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set","title":"Same Buffalo 120 Aftermarket Replacement Tractor Decals (sticker - aufkleber - adesivo) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken Same Buffalo 120 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214003822921,"sku":"same-buffalo-120-aftermarket-replacement-tractor-decals-sticker-aufkleber-adesivo-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4177368179_j1sr.jpg?v=1761644324"},{"product_id":"lamborghini-r955-aftermarket-replacement-tractor-decal-sticker-set","title":"Lamborghini R955 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lamborghini R955 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214007525705,"sku":"lamborghini-r955-aftermarket-replacement-tractor-decal-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174540745_kksm.jpg?v=1761644377"},{"product_id":"lamborghini-r-603-b-aftermarket-replacement-tractor-decal-sticker-set","title":"Lamborghini R 603 B Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lamborghini R 603 B Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214007624009,"sku":"lamborghini-r-603-b-aftermarket-replacement-tractor-decal-sticker-set-1","price":68.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174537307_3alg.jpg?v=1761644378"},{"product_id":"kverneland-ng-h-101-aftermarket-replacement-tractor-decal-sticker-set","title":"Kverneland NG-H 101 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Kverneland NG-H 101 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214007886153,"sku":"kverneland-ng-h-101-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174495415_lfcf.jpg?v=1761644383"},{"product_id":"kverneland-ld-120-aftermarket-replacement-tractor-decal-sticker-set","title":"Kverneland LD-120 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Kverneland LD-120 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214007918921,"sku":"kverneland-ld-120-aftermarket-replacement-tractor-decal-sticker-set-1","price":51.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174492433_elzo.jpg?v=1761644385"},{"product_id":"kverneland-ds-m-aftermarket-replacement-tractor-decal-sticker-set","title":"Kverneland DS-M Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Kverneland DS-M Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214007951689,"sku":"kverneland-ds-m-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4126824324_4r0h.jpg?v=1761644387"},{"product_id":"kverneland-fx225-aftermarket-replacement-tractor-decal-sticker-set","title":"Kverneland FX225 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Kverneland FX 225 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214008049993,"sku":"kverneland-fx225-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4174482823_45jx.jpg?v=1761644389"},{"product_id":"lamborghini-603dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Lamborghini 603DT Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lamborghini 603DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214009557321,"sku":"lamborghini-603dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":68.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6282440724_6v81.jpg?v=1761644421"},{"product_id":"goldoni-240-aftermarket-replacement-tractor-decal-sticker-set","title":"Goldoni 240 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Goldoni 240 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214016864585,"sku":"goldoni-240-aftermarket-replacement-tractor-decal-sticker-set-1","price":74.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4106588420_4nke.jpg?v=1761644587"},{"product_id":"goldoni-universal-230-aftermarket-replacement-tractor-decal-sticker-set","title":"Goldoni Universal 230 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Goldoni 230 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214016897353,"sku":"goldoni-universal-230-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4154265589_it26.jpg?v=1761644590"},{"product_id":"goldoni-universal-224-aftermarket-replacement-tractor-decal-sticker-set","title":"Goldoni Universal 224 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Goldoni 224 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214016962889,"sku":"goldoni-universal-224-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4106604582_ksue.jpg?v=1761644590"},{"product_id":"goldoni-521-aftermarket-replacement-tractor-decal-sticker-set","title":"Goldoni 521 Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Goldoni 521 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214016995657,"sku":"goldoni-521-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4154258023_ak7v.jpg?v=1761644593"},{"product_id":"lamborghini-653dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Lamborghini 653DT Aftermarket Replacement Tractor Decal (Sticker) Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lamborghini 653DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214022369609,"sku":"lamborghini-653dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":80.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.4126866846_bdgv.jpg?v=1761644652"},{"product_id":"lemken-zirkon-6300-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Zirkon 6\/300 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214022566217,"sku":"lemken-zirkon-6300-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274652061_eqt2.jpg?v=1761644660"},{"product_id":"lemken-vari-opal-9-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Vari-Opal 9 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214022631753,"sku":"lemken-vari-opal-9-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6226598890_obf3.jpg?v=1761644662"},{"product_id":"lemken-vari-opal-7-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Vari-Opal 7 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214022664521,"sku":"lemken-vari-opal-7-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274649549_5euz.jpg?v=1761644663"},{"product_id":"lemken-smaragd-7-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Smaragd 7 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023156041,"sku":"lemken-smaragd-7-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6226593742_mmpg.jpg?v=1761644665"},{"product_id":"lemken-opal-180-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Opal 180 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023188809,"sku":"lemken-opal-180-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274644755_tiu4.jpg?v=1761644663"},{"product_id":"lemken-opal-120-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Opal 120 Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023221577,"sku":"lemken-opal-120-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274643633_qmbm.jpg?v=1761644666"},{"product_id":"lemken-opal-110-new-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Opal 110 New Plow Pflug Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023287113,"sku":"lemken-opal-110-new-plow-pflug-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6274641113_hdv6.jpg?v=1761644667"},{"product_id":"lemken-opal-090-plow-pflug-n-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set","title":"Lemken Opal 090 Plow Pflug (N) Aftermarket Replacement decals \/ aufkleber \/ adesivo \/ sticker set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Lemken. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023319881,"sku":"lemken-opal-090-plow-pflug-n-aftermarket-replacement-decals-aufkleber-adesivo-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6234514156_1aqa.jpg?v=1761644670"}],"url":"https:\/\/decal-works.com\/collections\/other-tractor-machinery-decals.oembed?page=4","provider":"Decal Works Ltd","version":"1.0","type":"link"}