{"title":"Fiat Tractor Decals \u0026 Stickers | OEM-Style Replacement Sets","description":"\u003ch2 data-start=\"141\" data-end=\"210\"\u003e\u003cstrong data-start=\"144\" data-end=\"210\"\u003eFiat Tractor Decals – Restore the Factory Look of Your Machine\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"212\" data-end=\"505\"\u003eBring your Fiat tractor back to life with our premium replacement decal sets, designed to match original factory graphics with precision and durability. At Decal-Works, we offer a wide range of Fiat tractor decals covering classic, vintage and modern Fiat models used in agriculture worldwide.\u003c\/p\u003e\n\u003chr data-start=\"507\" data-end=\"510\"\u003e\n\u003ch2 data-start=\"512\" data-end=\"540\"\u003e\u003cstrong data-start=\"515\" data-end=\"540\"\u003eOEM-Style Fiat Decals\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"542\" data-end=\"728\"\u003eOur Fiat decal sets are designed to closely replicate the original factory appearance. They give your tractor a clean, professional OEM look while preserving the authentic Fiat branding.\u003c\/p\u003e\n\u003chr data-start=\"730\" data-end=\"733\"\u003e\n\u003ch2 data-start=\"735\" data-end=\"768\"\u003e\u003cstrong data-start=\"738\" data-end=\"768\"\u003eHeavy-Duty Outdoor Quality\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"770\" data-end=\"992\"\u003eAll Fiat tractor decals are produced using high-grade outdoor vinyl, UV-resistant inks and strong adhesive. They are built to withstand sunlight, rain, dirt, washing and demanding farm conditions without fading or peeling.\u003c\/p\u003e\n\u003chr data-start=\"994\" data-end=\"997\"\u003e\n\u003ch2 data-start=\"999\" data-end=\"1035\"\u003e\u003cstrong data-start=\"1002\" data-end=\"1035\"\u003ePrecision-Cut for Perfect Fit\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1037\" data-end=\"1181\"\u003eEvery decal set is precision-cut for a perfect fit on your Fiat tractor. Installation is simple and the finished result looks factory-installed.\u003c\/p\u003e\n\u003chr data-start=\"1183\" data-end=\"1186\"\u003e\n\u003ch2 data-start=\"1188\" data-end=\"1218\"\u003e\u003cstrong data-start=\"1191\" data-end=\"1218\"\u003eFast Worldwide Shipping\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1220\" data-end=\"1421\"\u003eAll Fiat decals are shipped worldwide from our warehouse with \u003cstrong data-start=\"1282\" data-end=\"1311\"\u003efree delivery in 3–7 days\u003c\/strong\u003e. Each order is carefully packed to arrive in perfect condition, whether you order one set or bulk quantities.\u003c\/p\u003e\n\u003chr data-start=\"1423\" data-end=\"1426\"\u003e\n\u003ch2 data-start=\"1428\" data-end=\"1457\"\u003e\u003cstrong data-start=\"1431\" data-end=\"1457\"\u003eWhy Choose Decal-Works\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"1459\" data-end=\"1613\"\u003e• OEM-style Fiat graphics\u003cbr data-start=\"1484\" data-end=\"1487\"\u003e• High-grade outdoor vinyl\u003cbr data-start=\"1513\" data-end=\"1516\"\u003e• Easy application\u003cbr data-start=\"1534\" data-end=\"1537\"\u003e• Free worldwide shipping\u003cbr data-start=\"1562\" data-end=\"1565\"\u003e• Trusted by farmers and tractor professionals\u003c\/p\u003e","products":[{"product_id":"fiat-fiatagri-90-90dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 90-90DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213887594825,"sku":"fiat-fiatagri-90-90dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5990053129_l2ta.jpg?v=1761643348"},{"product_id":"fiat-50-ci-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 50 CI Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 50 CI Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213889921353,"sku":"fiat-50-ci-aftermarket-replacement-tractor-decal-sticker-set-1","price":97.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5825309185_auii.jpg?v=1761643384"},{"product_id":"fiat-880dt-5-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 880DT 5 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213890871625,"sku":"fiat-880dt-5-aftermarket-replacement-tractor-decal-sticker-set-1","price":91.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835197918_px1t.jpg?v=1761643405"},{"product_id":"fiat-640-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 640 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 640 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213895655753,"sku":"fiat-640-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793483455_59s9.jpg?v=1761643458"},{"product_id":"fiat-780-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 780 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 780 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213896966473,"sku":"fiat-780-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745897956_pqca.jpg?v=1761643484"},{"product_id":"fiat-480-dt-special-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 480 DT Special Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 480 DT Special Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213906469193,"sku":"fiat-480-dt-special-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793472659_i5am.jpg?v=1761643511"},{"product_id":"fiat-fiatagri-50-66-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 50-66 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213906567497,"sku":"fiat-fiatagri-50-66-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6492757789_4d2z.jpg?v=1761643515"},{"product_id":"fiat-1000-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 1000 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 1000 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213906862409,"sku":"fiat-1000-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793497603_chiz.jpg?v=1761643520"},{"product_id":"fiat-780-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 780 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213907026249,"sku":"fiat-780-aftermarket-replacement-tractor-decal-sticker-set-1","price":91.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835178754_b8kp.jpg?v=1761643520"},{"product_id":"fiat-1180-dth-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 1180 DTH Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 1180 DTH Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213907059017,"sku":"fiat-1180-dth-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745906292_kwlo.jpg?v=1761643522"},{"product_id":"fiat-450-s-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 450 S Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 450 S Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908762953,"sku":"fiat-450-s-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793467431_4gpu.jpg?v=1761643555"},{"product_id":"fiat-fiatagri-110-90dt-nh-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 110-90DT NH Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908894025,"sku":"fiat-fiatagri-110-90dt-nh-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835225316_gut2.jpg?v=1761643559"},{"product_id":"fiat-450-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 450 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 450 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213908992329,"sku":"fiat-450-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745872072_8rpu.jpg?v=1761643564"},{"product_id":"fiat-fiatagri-70-66-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 70-66 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213909975369,"sku":"fiat-fiatagri-70-66-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6444661354_gi1m.jpg?v=1761643584"},{"product_id":"fiat-fiatagri-65-90-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 65-90 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213910040905,"sku":"fiat-fiatagri-65-90-aftermarket-replacement-tractor-decal-sticker-set-1","price":120.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835213244_afpr.jpg?v=1761643586"},{"product_id":"fiat-fiatagri-60-90-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 60-90 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213911515465,"sku":"fiat-fiatagri-60-90-aftermarket-replacement-tractor-decal-sticker-set-1","price":120.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5883307959_45nx.jpg?v=1761643621"},{"product_id":"fiat-466-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 466 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 466 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213911744841,"sku":"fiat-466-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745874890_hmcm.jpg?v=1761643625"},{"product_id":"fiat-fiatagri-65-90dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 65-90DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213925802313,"sku":"fiat-fiatagri-65-90dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":120.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835214466_4ek1.jpg?v=1761643660"},{"product_id":"fiat-480-someca-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 480 Someca Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 480 Someca Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213943955785,"sku":"fiat-480-someca-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745879384_33ex.jpg?v=1761643855"},{"product_id":"fiat-420-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 420 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 420 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213948838217,"sku":"fiat-420-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793463921_juya.jpg?v=1761643945"},{"product_id":"fiat-1880-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 1880 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 1880 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213951000905,"sku":"fiat-1880-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745910974_r4x3.jpg?v=1761643977"},{"product_id":"fiat-420-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 420 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 420 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213957128521,"sku":"fiat-420-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793465019_tsw9.jpg?v=1761644051"},{"product_id":"fiat-880-dt-someca-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 880 DT Someca Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 880 DT Someca Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213957259593,"sku":"fiat-880-dt-someca-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793495195_sajl.jpg?v=1761644057"},{"product_id":"fiat-fiatagri-45-66-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 45-66 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213960143177,"sku":"fiat-fiatagri-45-66-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6444654882_b4cl.jpg?v=1761644110"},{"product_id":"fiat-fiatagri-80-90dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 80-90DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213960208713,"sku":"fiat-fiatagri-80-90dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835218498_c289.jpg?v=1761644111"},{"product_id":"fiat-500-dt-special-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 500 DT Special Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 500 DT Special Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213961421129,"sku":"fiat-500-dt-special-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745880214_3mzy.jpg?v=1761644134"},{"product_id":"fiat-540-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 540 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 540 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213964206409,"sku":"fiat-540-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745882590_huo5.jpg?v=1761644187"},{"product_id":"fiat-fiatagri-88-94-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 88-94 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213967089993,"sku":"fiat-fiatagri-88-94-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6498582013_bcpk.jpg?v=1761644244"},{"product_id":"fiat-411-r-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 411 R Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 411 R Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213967221065,"sku":"fiat-411-r-aftermarket-replacement-tractor-decal-sticker-set-1","price":91.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745868942_mox5.jpg?v=1761644249"},{"product_id":"fiat-766-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 766 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 766 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53213967253833,"sku":"fiat-766-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793490827_qbw9.jpg?v=1761644250"},{"product_id":"fiat-fiatagri-55-66-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 55-66 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214000546121,"sku":"fiat-fiatagri-55-66-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6272022525_oe2a.jpg?v=1761644263"},{"product_id":"fiat-480-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 480 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 480 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214001561929,"sku":"fiat-480-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745876968_5coj.jpg?v=1761644289"},{"product_id":"fiat-fiatagri-115-90dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 115-90DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214001758537,"sku":"fiat-fiatagri-115-90dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":137.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5883324111_42o2.jpg?v=1761644294"},{"product_id":"fiat-550-dth-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 550 DTH Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 550 DTH Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214001856841,"sku":"fiat-550-dth-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745884484_brv7.jpg?v=1761644296"},{"product_id":"fiat-451c-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 451C Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214001987913,"sku":"fiat-451c-aftermarket-replacement-tractor-decal-sticker-set-1","price":68.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5883279155_cwrp.jpg?v=1761644300"},{"product_id":"fiat-fiatagri-60-66-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 60-66 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214008410441,"sku":"fiat-fiatagri-60-66-aftermarket-replacement-tractor-decal-sticker-set-1","price":57.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6223977564_mdg9.jpg?v=1761644394"},{"product_id":"fiat-640-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 640 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 640 Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214008901961,"sku":"fiat-640-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793482491_bg3a.jpg?v=1761644409"},{"product_id":"fiat-fiatagri-90-90-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 90-90 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214010245449,"sku":"fiat-fiatagri-90-90-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5883318047_l2a4.jpg?v=1761644438"},{"product_id":"fiat-fiatagri-82-94-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 82-94 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214010343753,"sku":"fiat-fiatagri-82-94-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6450476754_mh9k.jpg?v=1761644440"},{"product_id":"fiat-fiatagri-140-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 140-90 Turbo DT Powershift Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214010704201,"sku":"fiat-fiatagri-140-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set-1","price":137.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835230354_amvl.jpg?v=1761644450"},{"product_id":"fiat-fiatagri-65-66-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 65-66 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214011752777,"sku":"fiat-fiatagri-65-66-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":63.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6492761253_gk5i.jpg?v=1761644471"},{"product_id":"fiat-fiatagri-160-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 160-90 Turbo DT Powershift Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214017093961,"sku":"fiat-fiatagri-160-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set-1","price":137.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835231934_nvl2.jpg?v=1761644597"},{"product_id":"fiat-680-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 680 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 680 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214021615945,"sku":"fiat-680-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793485851_6d6b.jpg?v=1761644628"},{"product_id":"fiat-90-90-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 90-90 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 90-90 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214021878089,"sku":"fiat-90-90-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745863560_8kqh.jpg?v=1761644636"},{"product_id":"fiat-fiatagri-70-90-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 70-90 Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214023614793,"sku":"fiat-fiatagri-70-90-aftermarket-replacement-tractor-decal-sticker-set-1","price":126.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835215860_3wj6.jpg?v=1761644675"},{"product_id":"fiat-300-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 300 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 300 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214024597833,"sku":"fiat-300-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793459309_3kxb.jpg?v=1761644686"},{"product_id":"fiat-fiatagri-80-66-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 80-66 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214025744713,"sku":"fiat-fiatagri-80-66-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":68.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.6444662438_ts4u.jpg?v=1761644706"},{"product_id":"fiat-fiatagri-180-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat Fiatagri 180-90 Turbo DT Powershift Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214027153737,"sku":"fiat-fiatagri-180-90-turbo-dt-powershift-aftermarket-replacement-tractor-decal-sticker-set-1","price":137.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.5835232944_h99b.jpg?v=1761644714"},{"product_id":"fiat-680-dth-2-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 680 DTH - 2 - Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 680 DTH Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214029807945,"sku":"fiat-680-dth-2-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3793487863_5x4i.jpg?v=1761644766"},{"product_id":"fiat-980-dt-aftermarket-replacement-tractor-decal-sticker-set","title":"Fiat 980 DT Aftermarket Replacement Tractor Decal Sticker Set","description":"\u003cp\u003eAftermarket replacement decals set made to fit Fiat 980 DT Tractor. Digitally printed on polymeric foil and laminated - Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal - this is reproduction, similar to the original. May differ from the original in color, size, or shape. Logos are copyrighted by their respective owners.\u003c\/p\u003e\n\n\u003cp\u003eAPPLICATION\u003cbr\u003e\n1.You will need masking tape, spray bottle, Joy or dish washing liquid, and a tape measure.\u003c\/p\u003e\n\n\u003cp\u003e2.Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.\u003c\/p\u003e\n\n\u003cp\u003e3.With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.\u003c\/p\u003e\n\n\u003cp\u003e4.Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape (premask).\u003c\/p\u003e\n\n\u003cp\u003e5.While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. (The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.)\u003c\/p\u003e\n\n\u003cp\u003e6.Use the an squeegee ( credit card )to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air \u0026amp; water from under the Graphics.\u003c\/p\u003e\n\n\u003cp\u003e7.Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees - 30 minutes, 70 degrees - 3 hours, 50 degrees - 4 to 6 hours. These are recommendations ONLY….the Graphics MUST dry prior to the next step. 60 - 70 - 80 degrees are recommended temperatures for post installation.\u003c\/p\u003e\n\n\u003cp\u003e8. Slowly peel back the pre-mask translucent application tape; the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics; repeat squeegee process. LET DRY.\u003c\/p\u003e\n\n\u003cp\u003e9. Now check for any bubbles. If you find any, place a small piece of pre-mask tape over the area; squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over\u003cbr\u003e\ntime.\u003c\/p\u003e","brand":"411Decals","offers":[{"title":"Default","offer_id":53214049665353,"sku":"fiat-980-dt-aftermarket-replacement-tractor-decal-sticker-set-1","price":95.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/files\/il_fullxfull.3745902174_8l43.jpg?v=1761644941"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0791\/8701\/8057\/collections\/fiat-agri-tractor-decals-collection.webp?v=1767362243","url":"https:\/\/decal-works.com\/collections\/fiat-tractor-decals-stickers-oem-style-replacement-sets.oembed?page=8","provider":"Decal Works Ltd","version":"1.0","type":"link"}